Slide Milling is for customer supplied slides.

The current lead time is 4-8 weeks with an additional 1-3 for coating.

Shipping advisory: Due to issues with USPS JagerWerks is not responsible for packages after they leave our shop and we insist

you get shipping insurance for your returns under the GEAR section of our site. 

Free return shipping on orders over $100.

Trijicon RMR for Glock

MSRP:
Was:
Now: $125.00
(You save )
(440 reviews) Write a Review
Rear Dovetail/Behind Optic

Description

If holster wear/durability is a concern then we highly recommend going with our Black Nitride as Cerakote is a wearable item. 

Cerakote and Black Nitride are for the entire slide. (Black Nitride adds 2-3 weeks lead time) 

For Cerakote color codes and examples: https://jagerwerks.com/cerakote/

It is implied that the customer will have arrangements for coating of a slide if NONE is selected for color. If NONE is chosen there is potentially an issue for rust and corrosion to develop on the slide. Jagerwerks is not responsible for misuse and neglect of bare metal.

Our Trijicon RMR cut is milled to a depth of .125" which includes front recoil posts and mounting screws. 

Screws supplied are (2) #6-32 IP15. Both are safe to use on the extractor side of the slide. An IP15 wrench is included for install.

We do not charge extra for disassembly/reassembly, if you send your entire slide assembly we will laser align the sights for you.

If you include new sights we will install the new ones at no charge. If you include your RMR, barrel and recoil spring we will align it for free. 

If your iron sights are not compatible with the optic/optic cut we will not reinstall them. They will be sent back in a plastic bag with your slide.

Does not work on the 42. 43. 43x. 48. (small slides) 

The $20 upcharge on the 17L/41 is for a stainless steel plug that we install on the underside of the slide. This ensures proper thread engagement. 

Carbon Cap - This is used to fill the milled area of the slide when the optic is not in use. You are able to use standard or suppressor height sights with this installed. 

Sealing Plate -  With the seal plate installed, the RMR can be submerged up to 66ft. for at least one hour without leakage. Made from stainless steel and weighs 2.8 g.  

For iron sights please refer to this page Glock Trijicon RMR/SRO Iron Sights

 

440 Reviews

  • 5
    Perfect RMR Milling

    Published by C.Austin on Aug 23rd 2019

    There is literally no wiggle room between my slide and the RMR, so much so that I thought it was under-cut when I first received my slide back. It took a minute to figure out how to wiggle the RMR on correctly (i.e. don't baby it) but I prefer this over having slack in the cut. The Black Nitride finish is top notch, overall I couldn't be happier with the work performed.

  • 5
    Rmr slide milling

    Published by Branden on Aug 22nd 2019

    Great work

  • 5
    RMR milling

    Published by Kyle S. on Aug 6th 2019

    I sent my slide for milling and to be refinished with nitride. Turn around was excellent and the milling was flawless. There was no play when setting the optic and sealing plate over the posts. All said and done, I will be using them again for all my slide work.

  • 5
    Couldn't be happier

    Published by Jon M. on Jul 8th 2019

    I just got my slide back and I couldn't be happier with the finished product. The Cerakote is flawless and it is hard to tell that the slide did not come from the factory this way. I started with a G17FS (front serrations) slide, so I opted for just getting the RMR cut. After seeing how nice this turned out in person, and really liking the RMR, I wish I had gone all the way and had them do the full Yeti package. Jagerwerks has been fantastic to work with, and they will most definitely be doing the slide work for my 19.

  • 5
    RMR Cut

    Published by Collin Gray on Jul 4th 2019

    Wanted to keep the factory finish on my 19x and they did a great job. Sent in with the slide new iron sights and the rmr and they even sighted them in. From the time I sent the slide off to the time I got it back in my hands was only 12 days. Great job guys!!!

  • 5
    Glock 45 milling

    Published by Nathan on Jun 4th 2019

    This is my second time send a slide to jagerwerks and I will continue to coming back. The milling was perfect and fit my rmr.

  • 5
    G34 slide milled for Trijicon RMR

    Published by Jose O. on May 31st 2019

    I was quoted 6 weeks. Between sending the slide out and receiving it back in my mail box took only less than 4 weeks. That is the definition of efficiency. And the workmanship? World class. I wouldn’t recommend to anybody to shop around anymore. I’ll tell them exactly who to go to.

  • 5
    RMR Milling

    Published by BENJAMIN on May 26th 2019

    Milling and nitride finish are perfect! Laser alignment saves the hassle of sighting it in. Only need fine tuning after that. Will use Jagerwerks again!

  • 5
    Perfect Fit and Finish

    Published by David on May 23rd 2019

    What more can I say other than my Glock 20 slide was milled out for a perfect fit with my Trijicon RMR type 2. I will be sending in my Glock 19 for the same mill work.

  • 5
    glock 19 slide milling

    Published by D. Farrell on May 23rd 2019

    As with the numerous reviews already posted, I was and am extremely satisfied with the work provided. Turnaround is exactly what they said 30 days so be ready.

Related Products