Slide Milling is for customer supplied slides.

The current lead time is 4-8 weeks with an additional 1-3 for coating.

Shipping advisory: Due to issues with USPS JagerWerks is not responsible for packages after they leave our shop and we insist

you get shipping insurance for your returns under the GEAR section of our site. 

Free return shipping on orders over $100.

Trijicon RMR for Glock

MSRP:
Was:
Now: $125.00
(You save )
(437 reviews) Write a Review
Rear Dovetail/Behind Optic

Description

If holster wear/durability is a concern then we highly recommend going with our Black Nitride as Cerakote is a wearable item. 

Cerakote and Black Nitride are for the entire slide. (Black Nitride adds 2-3 weeks lead time) 

For Cerakote color codes and examples: https://jagerwerks.com/cerakote/

It is implied that the customer will have arrangements for coating of a slide if NONE is selected for color. If NONE is chosen there is potentially an issue for rust and corrosion to develop on the slide. Jagerwerks is not responsible for misuse and neglect of bare metal.

Our Trijicon RMR cut is milled to a depth of .125" which includes front recoil posts and mounting screws. 

Screws supplied are (2) #6-32 IP15. Both are safe to use on the extractor side of the slide. An IP15 wrench is included for install.

We do not charge extra for disassembly/reassembly, if you send your entire slide assembly we will laser align the sights for you.

If you include new sights we will install the new ones at no charge. If you include your RMR, barrel and recoil spring we will align it for free. 

If your iron sights are not compatible with the optic/optic cut we will not reinstall them. They will be sent back in a plastic bag with your slide.

Does not work on the 42. 43. 43x. 48. (small slides) 

The $20 upcharge on the 17L/41 is for a stainless steel plug that we install on the underside of the slide. This ensures proper thread engagement. 

Carbon Cap - This is used to fill the milled area of the slide when the optic is not in use. You are able to use standard or suppressor height sights with this installed. 

Sealing Plate -  With the seal plate installed, the RMR can be submerged up to 66ft. for at least one hour without leakage. Made from stainless steel and weighs 2.8 g.  

For iron sights please refer to this page Glock Trijicon RMR/SRO Iron Sights

 

437 Reviews

  • 5
    Trijicon RMR Cut & Cerakote

    Published by Matthew T. on Dec 5th 2020

    The lead time was accurate & I felt naked without my carry gun for 3 weeks. My Glock 19 Gen 5 slide came back looking amazing with the black multicam Cerakote. I just put on my Trijicon Bright & Tough suppressor height sights along with my new RMR06 type 2 red dot on at my local gun range & was complimented on the slide by multiple people & the gunsmith. It’s officially all Gucci’ed out now & it’s so sexy! I feel bad putting it in my Tier1 Concealed Axis Elite appendix holster...seriously.

  • 5
    RMR Cut and Black Nitride

    Published by David on Dec 1st 2020

    This is my second Glock slide milled and coated by JagerWerks. Amazing fit and finish, they are among the best.

  • 5
    Amazing

    Published by Ryan Hastings on Nov 26th 2020

    Came back much sooner than expected. Excellent fit and finish.

  • 5
    RMR Cut G19.5

    Published by Mike on Nov 21st 2020

    Excellent! I heard these guys are the best and was not dissapointed. Went with an RMR cut on a G19.5 OEM slide. Jagerwerks installed new irons and the RMR. The black nitride finish is flawless. Turn around time was less than expected as well. Can't wait to start a new project and give these guys some more of my money.

  • 5
    RMR Cut

    Published by Unknown on Nov 18th 2020

    I sent 2 slides with 2 RMRs and iron sights for both. The slides came back sooner than quoted and everything installed perfectly. If you are on the fence bite the bullet and do it! I can’t wait to send more in

  • 5
    Awesome!!!

    Published by Samson Du on Nov 18th 2020

    Turn around was half the time the website was quoting! Excellent work! I couldn’t be happier with the results!!!

  • 5
    Fantastic

    Published by Matt on Nov 16th 2020

    The work was without fault. I sent in my slide assembly with new sights for an RMR cut. All the ordered work was done, and I wouldn’t be able to find something to complain about if I wanted to. The milling work appears perfect and the RMR fits amazingly. I’m addition to the superb quality of the work, the turnaround was fast. The website says 4-8 week turnaround, and I think the turnaround was actually 2 weeks including shipping both ways. That was a pleasant surprise.

  • 5
    RMR cut

    Published by Dylan on Nov 12th 2020

    Everything went smoothly. Customer service answered any questions I had very quickly. I got an RMR cut with black cerakote. I sent them a slide, a RMR, and replacement sights. After they recieved the parts, they had it completed and sent back to me in less than 2 weeks. I will be having them do more for me in the future!

  • 5
    Glock 19 Trijicon RMR Optic Cut

    Published by Ryan on Nov 9th 2020

    Excellent job! Very nice craftsmanship. Turnout around time was only three weeks and my slide and optic was assembled and mounted flawlessly. This was the first time I’ve used Jagewerks, but it certainly won’t be the last! Keep up the great work guys!

  • 5
    Glock 19 RMR Optic Cut

    Published by KDJ on Nov 5th 2020

    I requested the RMR “race cut” and black nitride finish for my Glock 19 slide. The slide was returned in about a month. The mill-work and slide finish are perfect and exactly as ordered. I installed the sight, assembled the gun and test fired it at my range. The gun functions flawlessly. I couldn’t be happier with the outstanding Jagerwerks service!

Related Products