Behind Optic/Rear Dovetail Medium Frame
Zoom the image with the mouse

Holosun K Series for Glock

(29 reviews) Write a Review
$125.00
Size Chart

Related Products

Description

If holster wear/durability is a concern then we highly recommend going with our Black Nitride as Cerakote is a wearable item. 

Cerakote and Black Nitride are for the entire slide. (Black Nitride adds 2-3 weeks lead time) 

For Cerakote color codes and examples: https://jagerwerks.com/cerakote/

It is implied that the customer will have arrangements for coating of a slide if NONE is selected for color. If NONE is chosen there is potentially an issue for rust and corrosion to develop on the slide. Jagerwerks is not responsible for misuse and neglect of bare metal.

Our Holosun K Series cut is milled to a depth of .125" which includes front recoil posts and mounting screws. 

Screws supplied are (2) #6-32 IP15. Both are safe to use on the extractor side of the slide. An IP15 wrench is included for install.

We do not charge extra for disassembly/reassembly, if you send your entire slide assembly we will laser align the sights for you.

If you include new sights we will install the new ones at no charge. If you include your Holosun, barrel and recoil spring we will align it for free. 

Works on Large, Medium and Small frame Glocks. 

Holosun K Series - #6-32 x 7/16" IP15 screws are included. 

For a lower 1/3rd co-witness you will need the irons listed below. If you include these with your slide we will install them at no extra cost. 

Rear iron sight - .225" / .125" wide https://dawsonprecision.com/dawson-precision-glock-mos-fixed-non-co-witness-sights/

Front iron sight - .220" / .125" wide https://dawsonprecision.com/dawson-precision-glock-standard-front-sights/

Race cut (no rear iron) front sight - .190" / .115" wide https://dawsonprecision.com/dawson-precision-glock-standard-front-sights/

Shield RMS/c will fit this cut as well but  #6-32 x 3/8" IP15 screws are required. You can purchase Shield Screws here https://jagerwerks.com/optic-screws/

Swampfox Sentinel will fit this cut as well but #6-32 x 3/8" IP5 (equal length) screws are required. You can purchase Sentinel screws here https://jagerwerks.com/optic-screws/  

If your iron sights are not compatible with the optic/optic cut we will not reinstall them. They will be sent back in a plastic bag with your slide.

The $20 upcharge on the 17L/41 is for a stainless steel plug that we install on the underside of the slide. This ensures proper thread engagement. 

29 Reviews

  • 507k mill and cerakote
    5

    Posted by Jake on Jun 10th 2021

    Fantastic product. Turnaround time is accurate. Will use again and would recommend. Thanks!

  • Holosun K series for Glock
    5

    Posted by PMcC on Jun 9th 2021

    Couldn't be happier, the workmanship is flawless and the turn around time was exactly what they said it would be. Like a few other reviewers I'm going to send my G17 in now to get it milled too. I highly recommend Jagerwerks!

  • HOLOSUN K SERIES CUT
    5

    Posted by Kevin on Jun 1st 2021

    JAGERWERKS...you guys are top notch. The work on my slide was flawless. Installed included iron sites and zeroed the RDS....put a couple of magazines through it and it was dead on! Now I just gotta send my Glock 19 to you guys and get it done too...

  • Holosun cut and Cerakote
    5

    Posted by Sam Berry on Jun 1st 2021

    Slide came out great! My holosun fit flawlessly will be sending more slides to you guys!

Write a Review

Shipping & Returns

Shipping

Please ship to our address 

JagerWerks Eng LLC 

111 D ave East 

Kalamazoo MI, 49009 

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

 Shipping Insurance and Signature Confirmation 

http://jagerwerks.com/shipping-insurance-with-signature-confirmation/

When shipping slides for milling, SHIP SLIDES ONLY. Do NOT ship the lower of the firearm as we are not transferring the firearm. We only custom mill slides.

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, please Contact Us with your order number and details about the product you would like to return. We will respond quickly with instructions for how to return items from your order.