Slide Milling is for customer supplied slides.

The current lead time is 4-8 weeks with an additional 1-3 for coating.

Shipping advisory: Due to issues with USPS JagerWerks is not responsible for packages after they leave our shop and we insist

you get shipping insurance for your returns under the GEAR section of our site. 

Free return shipping on orders over $100.

Holosun K Series for Glock

MSRP:
Was:
Now: $125.00
(You save )
(25 reviews) Write a Review
Behind Optic/Rear Dovetail Medium Frame

Description

If holster wear/durability is a concern then we highly recommend going with our Black Nitride as Cerakote is a wearable item. 

Cerakote and Black Nitride are for the entire slide. (Black Nitride adds 2-3 weeks lead time) 

For Cerakote color codes and examples: https://jagerwerks.com/cerakote/

It is implied that the customer will have arrangements for coating of a slide if NONE is selected for color. If NONE is chosen there is potentially an issue for rust and corrosion to develop on the slide.

If your iron sights are not compatible with the optic/optic cut we will not reinstall them. They will be sent back in a plastic bag with your slide.

Jagerwerks is not responsible for misuse and neglect of bare metal.

Holosun K series 6-32 7/16" IP15 screws are included. An IP15 wrench is included for install.

For a lower 1/3rd co-witness you will need the irons listed below. If you include these with your slide we will install them at no extra cost. 

Rear iron sight - .225" / .125" wide https://dawsonprecision.com/dawson-precision-glock-mos-fixed-non-co-witness-sights/

Front iron sight - .220" / .115" wide https://dawsonprecision.com/dawson-precision-glock-standard-front-sights/

Race cut (no rear iron) front sight - .190" / .115" wide https://dawsonprecision.com/dawson-precision-glock-standard-front-sights/ 
 
The $20 upcharge on the 17L/41 is for a stainless steel plug that we install on the underside of the slide. This ensures proper thread engagement. 
 

 

25 Reviews

  • 5
    Milling

    Published by Greg Mathewson on Mar 15th 2023

    Great quality and just as described. It took a while to get the slide back but excellent work!

  • 5
    Great Optic Cut

    Published by Steve on Feb 26th 2023

    I sent my Gen 4 G19 slide in for an optic cut and nitride coating. Jagerwerks did a great job and the turnaround was pretty quick considering I sent the slide in over the holiday season. Would definitely recommend the nitride coating it looks great and seems very durable. Mounted by holosun 507K and 500 rounds in or so and everything seems to be working great. I also added the dawson precision co-witness sights they recommends very nice co-witness as a backup. Also the customer service is great very quick to respond and receptive.

  • 5
    Slide milling

    Published by Larry H on Dec 22nd 2022

    Jagerwerks milled and coated my Glock 43X slide with black nitride. Excellent craftsmanship. I would highly recommend their service.

  • 5
    Holosun EPS Carry cut

    Published by Andy on Nov 16th 2022

    Wow...WOW...WOW!!! This is my first personal optic mounted handgun and Jagerwerks has knocked it out of the ballpark and took out a traffic light. I have seen other people's optic cuts and the are most times okay but with a little wiggle, notable space in front/back, offset to the side, signs of rust etc. My optic cut...FLAWLESS and sharpness comes to mind. My EPS Carry sits flush on the sides with my G19G4 slide. The only protruding part by very little is the EPS Carry's battery compartment...very small, no issue, no fault of Jagerwerks. The Carry model has an integrated mediocre rear sight which I took a chance on to have the rear sight removed to use that integrated rear and standard height front sight...usable at the very bottom of the optic and lines up with my particular red dot zero...your mileage may vary. I am still astounded by the workmanship that took 11 weeks to get back to me. Worth every aggravating day due to me being anxious. I left Jagerwerks alone and let them do their work. Their updates were spot on and my slide came in the mail. Got to know the post office people very well now when asking for an item just in case Jagerwerks forgot to update the status. No, they were really good on updating. Took the mailman and his family out to shoot the handgun a few days after receiving my slide and zeroing it. Even those anti gun people loved it. Mailman and his wife getting his first handgun next week, her first 20ga shotgun.

  • 5
    G48, 507k

    Published by Carlos on Oct 27th 2022

    Excellent work, turn around time was quicker than expected!!!

  • 5
    Mill work

    Published by Larry on May 31st 2022

    Very high quality-simple process Thanks!

  • 5
    G48 507K

    Published by Justin Cotton on Apr 13th 2022

    Just received my G48 back that received the 507K optic cut. Amazing quality work and got it back quicker than advertised lead time! Great job!!

  • 5
    Glock 19/HS507K Optic/Sniper Grey slide

    Published by Rob on Apr 11th 2022

    Had my Glock 19 slide sent in for optic and cerakote. Came back great! I purchased insurance just incase, I recommend you do as well! Highly recommend!

  • 5
    Holosun K series slide milling

    Published by Brent Thiele on Mar 24th 2022

    sent my slide in to be cut for the K series in anticipation for the new EPS sight dropping. Slide work was done quicker then quoted and looks AMAZING, as indicated elsewhere on the interwebs Jagerwerks machining is second to none!

  • 5
    Holosun K Series Slide Cut for Glock 43X

    Published by Mark Durand on Mar 5th 2022

    Outstanding workmanship! My Holosun 507 K fit like a glove. Can’t say enough about the quality from JagerWerks.

Related Products