Slide Milling is for customer supplied slides.

The current lead time is 4-8 weeks with an additional 1-3 for coating.

Shipping advisory: Due to issues with USPS JagerWerks is not responsible for packages after they leave our shop and we insist

you get shipping insurance for your returns under the GEAR section of our site. 

Free return shipping on orders over $100.

Trijicon RMR for Glock

MSRP:
Was:
Now: $125.00
(You save )
(440 reviews) Write a Review

Description

If holster wear/durability is a concern then we highly recommend going with our Black Nitride as Cerakote is a wearable item. 

Cerakote and Black Nitride are for the entire slide. (Black Nitride adds 2-3 weeks lead time) 

For Cerakote color codes and examples: https://jagerwerks.com/cerakote/

It is implied that the customer will have arrangements for coating of a slide if NONE is selected for color. If NONE is chosen there is potentially an issue for rust and corrosion to develop on the slide. Jagerwerks is not responsible for misuse and neglect of bare metal.

Our Trijicon RMR cut is milled to a depth of .125" which includes front recoil posts and mounting screws. 

Screws supplied are (2) #6-32 IP15. Both are safe to use on the extractor side of the slide. An IP15 wrench is included for install.

We do not charge extra for disassembly/reassembly, if you send your entire slide assembly we will laser align the sights for you.

If you include new sights we will install the new ones at no charge. If you include your RMR, barrel and recoil spring we will align it for free. 

If your iron sights are not compatible with the optic/optic cut we will not reinstall them. They will be sent back in a plastic bag with your slide.

Does not work on the 42. 43. 43x. 48. (small slides) 

The $20 upcharge on the 17L/41 is for a stainless steel plug that we install on the underside of the slide. This ensures proper thread engagement. 

Carbon Cap - This is used to fill the milled area of the slide when the optic is not in use. You are able to use standard or suppressor height sights with this installed. 

Sealing Plate -  With the seal plate installed, the RMR can be submerged up to 66ft. for at least one hour without leakage. Made from stainless steel and weighs 2.8 g.  

For iron sights please refer to this page Glock Trijicon RMR/SRO Iron Sights

 

440 Reviews

  • 5
    Trijicon RMR slide milling

    Published by Gus H. on Jun 7th 2025

    Jagerwerks performed a simple optics cut for a Trijicon RMR.2 on a 19.5 slide. I opted to get the nldc black finish as well. It took approximately 6 weeks to get it back in hand. When I received the finished product, it looks like something that should’ve came factory from Glock. The gap between slide and optic is nearly invisible and the tolerances are incredibly tight. The coating looks like factory Gen5. They installed the irons I included as well. When I took this to the range it zeroed within minutes. It performed flawlessly and had zero issues. If you’re looking to mill a slide, this is the way to go. Good work Jagerwerks.

  • 5
    Repeat Customer

    Published by Aaron Anderson on May 21st 2025

    Super tight optic fit and flawless black nitride finish!

  • 5
    RMR cut for Glock 31 Gen 4

    Published by Claude Bramwell on Apr 27th 2025

    I couldn't be happier with the cut, cerakote, and mounting a Holosun green dot on my ugly duckling Glock. It is now the swan of my collection.

  • 5
    RMR Optic Cut

    Published by Fred P. on Apr 8th 2025

    Impeccable optic cut! I sent in my 507comp and they cut, nitrided, added front serrations, and mounted my optic. Jagerwerks nitride finish is even better than the stock glock finish! Highly recommended!

  • 5
    Rmr slide milling

    Published by Josh on Mar 21st 2025

    Amazing job! Incredible quality and work was done much faster than the expected quote to be done!! Super happy!

  • 5
    RMR cut for G45

    Published by Ervin deLeon on Feb 21st 2025

    I ordered this to replace the aftermarket slide I bought for a G45. The aftermarket slide was having cycling issues and I wanted to retain the consistency I had with the OEM slide. Jagerwerks gave me just that with the cuts to the OEM slide I sent in. I put about 200+ rounds through (Speer Lawman 147 gr) without a single cycling issue. I’ll soon be sending in another slide (Gen 3 G17) for another cut. The folks at Jagerwerks were also great at giving me a realistic timeline and updates. I highly recommend Jagerwerks for any others looking to get their slides cut for a MRDS.

  • 5
    RMR Cut

    Published by Lemuel Pia on Feb 7th 2025

    This is my 3rd Optic cut wtih Them!! There are other that ofer the same service near me but I trust them Since I have 2 other slide milling and optic cuts made by them, in the past, I am impressed by the quality and workmanship. Thanks!

  • 5
    RMR Cut

    Published by Dean Price on Dec 3rd 2024

    Perfect fit. Great customer service.

  • 5
    Perfect as always.

    Published by An on Aug 19th 2024

    RMR locks into place perfectly. Always great work from these guys. BEST PART: It was only 18 days from arrival to being shipped back for a single RMR cut with no coating. Way faster than 4 weeks I was expecting.

  • 5
    Trijicon RMR for Glock

    Published by Scott on Aug 3rd 2024

    Excellent work! Highly recommend Jagerwerks!

Related Products