Description

If holster wear/durability is a concern then we highly recommend going with our Black Nitride as Cerakote is a wearable item.

Cerakote and Black Nitride are for the entire slide. (Black Nitride adds 2-3 weeks lead time)

For Cerakote color codes and examples: https://jagerwerks.com/cerakote/

It is implied that the customer will have arrangements for coating of a slide if NONE is selected for color. If NONE is chosen there is potentially an issue for rust and corrosion to develop on the slide. Jagerwerks is not responsible for misuse and neglect of bare metal.

Our Trijicon RMR cut is milled to a depth of .185" which includes front recoil posts and mounting screws.

Screws supplied are (2) #6-32 IP15. Both are safe to use on the extractor side of the slide. A IP15 is needed for install

We do not charge extra for disassembly/reassembly, if you send your entire slide assembly we will laser align the sights for you.

If you include new sights we will install the new ones at no charge. If you include your RMR, barrel and recoil spring we will align it for free.

A Glock rear dovetail will be milled for the rear iron sight.

CZ front sights are very difficult to remove without damaging it. We do our best to remove it without damage, but you should plan on replacing it.

** When milling for an optic on a CZ P10 the right (extractor side) screw hole will break into the striker assembly. This will not cause any issues with reliability of the firearm.**

CZ P10 S/C/F Trijicon RMR Iron Sights-

Lower 1/3rd Co-Witness Rear Dovetail (behind optic)

Only offered with a fiber front.

- Blacked Out Rear/Fiber Front - (Rear Iron Sight is a Glock .360"/.125" wide, Front Iron Sight is P10 .240"/.115" wide)

Dawson Precision Glock MOS Fixed Co-Witness Rear Sights

Dawson Precision CZ P10C Fiber Optic Front Sights

Lower 1/3rd Co-Witness Forward Dovetail (front of optic)

Only offered with a fiber front.

- Blacked Out Rear/Fiber Front - (Rear Iron Sight is a Glock .245"/.125" wide, Front Iron Sight is P10 .240"/.115" wide)

Dawson Precision Glock MOS Fixed Non Co-Witness Sights

Dawson Precision CZ P10C Fiber Optic Front Sights

Absolute Co-Witness Rear Dovetail (behind optic)

- Blacked Out Rear/Blacked Out Front - ( Rear Iron Sight is .440"/.125" wide, Front Iron Sight is P09 .330"/.100" wide)

Dawson Precision Glock MOS Fixed Co-Witness Rear Sights

Dawson Precision CZ P09 Black Front Sights

Absolute Co-Witness Front Dovetail (front of optic)

- Blacked Out Rear/Blacked Out Front - ( Rear Iron Sight is .335"/.125" wide, Front Iron Sight is P09 .330"/.100" wide)

Dawson Precision Glock MOS Fixed Co-Witness Rear Sights

Dawson Precision CZ P09 Black Front Sights

UPC:

13 Reviews

5
Simply the best

Published by Matthew Judge on Feb 11th 2022

As many others have stated, it was well worth the wait. I actually got my slide back in less than the quoted time. Very happy with the quality. Top notch work.
5
Top Notch Work As Always!!

Published by Bryant Sanchez on Oct 2nd 2021

Jumped on the 4th of July promotion and sent out my P-10C slide the following week. I opted for the Trijicon RMR cut and nitride coating. It was a good 10 week turnaround time after they processed in my slide. Despite the longer than usual 6-8 week wait time, the quality of the work is completely worth it. I'd do it over & over again.
5
CZ P-10s w/optics cut mounting and multicam perfect!

Published by William Bronson on Jul 22nd 2021

Wow! Thank you for such great work. I could not have imagined my CZ P-10s looking this good. The Holosun cut and mounting is perfect. It is dead on. The JW Black Multicam (MC Green, Sniper Gray, Black) blew away my expectations. It was worth every penny. Even though the wait may seem longer than some promise, it came to me early, and was worth the wait.
5
CZ P-10C RMR

Published by Noah H. on Jan 29th 2021

Absolutely phenomenal cut, mount, coating, and customer service. I've had the optic mounted for about 18 months, carrying daily, with ZERO issues. Also, when my slide was due to be returned to me, I was activated for a rapid deployment and JW's superb customer service had my slide + RMR quickly and safely sent to a holder for me on the fly. I'd give 6 stars if I could!
5
Clean and fast

Published by Dave on Jan 28th 2021

Slide milled to perfection, suppressor height sights installed and zeroed, and nitride looks perfect. Back on my doorstep 6 weeks from the day it was received and that includes the 2-3 week estimate for nitride. Cannot recommend highly enough!
5
Cz Trijicon SRO

Published by Joe Ross on Nov 17th 2020

Awesome job by Jagerwerks! Had them do an optic cut for a trijicon SRO on my cz p10c. Fit & finish are perfect & the nitride finish they did to the slide is great. Looks even better than the factory finish. Lead times not bad either. Had my slide back 6 weeks to the day I shipped it & that includes the extra 2-3 week lead time for nitride.
5
P10c RMR

Published by Chris on Aug 13th 2020

Fantastic job, well worth the wait. My only gripe is that I hadn't sent it in sooner. The black multicam cerakote is flawless as well. If you're on the fence about sending in your slide, just do it, worth every penny. Can't wait to take it out.
5
CZ p10c RMR cut / Black Nitride

Published by TW on Jul 19th 2019

this is my third slide cut and I will always come back to JagerWerks! superior craftsmanship and one of the best customer service in the industry. RMR fits on the slide absolutely perfect, no movement or play at all. nitride looks so fresh and so clean too! sights are always on point and bore sighted upon return if theyre sent in with the slide. wait times are increasing butt theres a reason for that. JW does amazing work and at an affordable price point. Thank You.
5
P10-C Milling and Nitride

Published by Shane on Jun 28th 2019

Fast turn around - got it back about 3 weeks total after I had mailed it in - during a holiday no less. I sent in my own RMR, aftermarket recoil spring system and parts. They assembled everything - got it pretty close to zero, and returned the original packaging, parts and sent my stock sights back. Everything was in great condition. I sent in my Glock as well - highly recommended!
5
Awesome Fast Quality

Published by Ken Graffeo on Oct 26th 2018

They had my slide for less than 2 weeks. When It was returned, what a quality job in the milling and cerakote. Im impressed. Don't be hesitant in using JagerWerks, they did a great job!!!