Description

The Battle Ready Optic Shield (B.R.O.S.) is for the Trijicon SRO only. Does not fit any other optic.

100% Made in Michigan out of laser welded grade 304 stainless steel then black nitride coated for years of worry-free service.

This is a shield for the Trijicon SRO and is designed to increase the durability and resistance to impact damage of your optic in real life situations. We do not expect this to make your optic invulnerable, you should not either.

We will not warranty your optic.

Does not include mounting screws. We recommend using our RMR/SRO #6-32 7/16" IP15

Weight is 1 oz or 28 grams. Metal thickness is 1mm or .040".

There is a slight bend on the ejection (right) side of the shield. This is to deflect brass.

SRO is NOT included.

For Safariland holster modifications to accommodate the BROS please reach out to https://www.ghostmendesigns.com/

UPC:

73 Reviews

5
No Brainer

Published by Matt on Dec 27th 2021

Definitely quite a wait to get these, but without question completely worth it and perfect for protecting the optic. Higher quality than I what I expected. No Brainer for any SRO build.
5
I have 3 of them if that tells you anything

Published by jerdog3 on Aug 30th 2021

Get on the waiting list if they are sold out. It's a small price to pay to protect your expensive optic.
5
Just get the BROS, bros

Published by Ben B on Jul 13th 2021

Exactly what you’d expect from a top tier machine shop
5
BROS

Published by R. Stewart on Jun 13th 2021

Perfect protection shroud for the Trijicon SRO. Installed over SRO with recommended screws and found it to be rugged in real-time use. Looks good too (nitrided) with negligible extra width. It’s a solid part at a fair cost. Will definitely purchase again.
5
B.R.O.S

Published by Rolando Ramirez Jr. on Jun 10th 2021

This is awesome…. Fits perfectly…
5
Insurance

Published by Todd Eby on May 28th 2021

Added this little bit of insurance to my SRO that's mounted on my Buckmark that I use for Steel Challenge since it lives in a bag from stage to stage and, inevitably, gets knocked around a bit...fit and finish is great and seems to give that added measure of protection that saves the optic from getting banged up. Now I just need more to come in stock so I can add it to my PCC and my Open gun that has a slide ride SRO.
5
Great solution!

Published by Andy on May 28th 2021

So far the shield has exceeded expectations. The machine quality is amazing and it solves a problem that I and many others are concerned about. 5/5 stars.
5
BROS

Published by Michael Nolen on May 4th 2021

This is mounted on my scalarworks 1.93 mount with my SRO and it is just what I needed. It gives the SRO the protection it needs for those tougher activities! Build quality us what you would expect from Jagerwerks!!
5
B.R.O.S. for Trijicon SRO

Published by Steven Jackson on Apr 27th 2021

The Trijicon SRO is my favorite fast/light weight red dot however it doesn't have the durability the RMR has. Jagerwerks has solved that problem, providing the protection I need while keeping all the benefits of the SRO. My set up with the Scalarworks mount/SRO and B.R.O.S comes in at about 4.25 ounces and is fast and light. This is my favorite set up on a BCM 11.5. The fit and Finish were great and installation took about 3 minutes. A+ all the way around
5
Armor for your Trijicon SRO

Published by Michael Holden on Apr 26th 2021

You spend a lot of money on great optics and you always want to protect them. The Jagerworks B.R.O.S. does exactly that for a small price. Looks great, fits snuggly and adds the kind of protection you need to protect your gear. The Battle Ready Optic Shield blends in with the Trijicon and provides the kind of protection you need for a very small price. I’m extremely happy with the fit, finish and how well it blends in and becomes almost invisible to the fit and function of the SRO.