Description

The Battle Ready Optic Shield (B.R.O.S.) is for the Trijicon SRO only. Does not fit any other optic.

100% Made in Michigan out of laser welded grade 304 stainless steel then black nitride coated for years of worry-free service.

This is a shield for the Trijicon SRO and is designed to increase the durability and resistance to impact damage of your optic in real life situations. We do not expect this to make your optic invulnerable, you should not either.

We will not warranty your optic.

Does not include mounting screws. We recommend using our RMR/SRO #6-32 7/16" IP15

Weight is 1 oz or 28 grams. Metal thickness is 1mm or .040".

There is a slight bend on the ejection (right) side of the shield. This is to deflect brass.

SRO is NOT included.

For Safariland holster modifications to accommodate the BROS please reach out to https://www.ghostmendesigns.com/

UPC:

68 Reviews

5
Incredible Product

Published by Don on Sep 12th 2023

Very innovative and well thought out product. As soon as I seen this I knew I needed one. I didn’t even have the SRO before finding out about the BROS, and that’s what made me order them both. It’s like having an EOTECH with the outer shield now. Very sturdy, didn’t make my optic sit too much higher, 10/10 would highly
5
BROS

Published by Scott on Jul 12th 2023

This is a great product. It fully encases the SRO and adds a level of protection. I’m not in the habit of dropping my gun but the $50 buys me peace of mind. The BROS fit my SRO perfectly, was simple to install, and isn’t as bulking as I was afraid it would be.
5
Nice accessory to protect your pricey optic

Published by Louis on Jun 23rd 2023

Great piece of hardware to protect your pricey optic. Really love this thing on my FNX45 Tactical. Install was easy. SROs aren't cheap so I'm glad I have some peace of mind with this thing protecting it now. The SRO still probably isn't duty ready but at least I'll know this thing should protect my SRO if it gets dinged or what not. Better than having nothing and praying your optic doesn't break. Product is well made and looks good too. Cowitness might be a little more difficult with this thing on for some handguns but it was fairly minimal for my FNX45.
5
BROS SRO Shroud

Published by Jon Walker on May 28th 2023

As mentioned by many, this is a very well made product. The metal is quality and the fit/finish it top notch as well. Just be aware this will set your SRO up a bit so 100% co-witness is hard to achieve.
5
Well Made - Great Design

Published by Anthony Boles on May 22nd 2023

As indicated by many, this is a very well made product. The metal is quality and the fit/finish it top notch as well. Just be aware this will set your SRO up a bit so co-witness will be off. Overall, I like the setup very much.
5
BROS

Published by Mike Hilton on May 22nd 2023

Quality product, well made and worth the investment for your SRO
4
Sro shroud

Published by Fresh on Apr 5th 2023

Second one I've purchased, product works as intended. Only negative both times I've had to change my guide rod spring due to the extra weight of the sight and the shroud. Would not consistently reset slide causing light strikes.
5
BROS

Published by TommyT on Feb 22nd 2023

Once back in stock item arrived fast. It was bigger than expected on Glock 34 Zaffiri precision slide but I I am fine knowing that I have the added protection in case of a fall. I purchased the extra screws and they were not needed. Heads up if you have as a Zaffiri slide you will have to use their screws because the thread is different than normal. A very well made product and I would highly recommend for anyone that has an SRO.
5
Amazing product

Published by Bill Kovalick on Feb 21st 2023

Fits perfectly and gives great protection to the optic. Took one class with this already and it held up against all the torture I threw at it.
4
BROS

Published by T-Man on Jan 20th 2023

Won't work for me. Well made product and sturdy. Will protect an SRO. However, with the BROS installed my G19 won't fit in my Safariland holster. Also noticed the torx head size on the JW mounting screws are bigger than the original SRO mounting screws. Thread is same, just can't use same size torx bit. Could still access the side controls with finger tip. BROS does stick out over side of slide a little more than expected.