Cerakote is for the entire slide. (Black Nitride adds 2-3 weeks lead time)
It is implied that the customer will have arrangements for coating of a slide if NONE is selected for color. If NONE is chosen there is potentially an issue for rust and corrosion to develop on the slide. Jagerwerks is not responsible for misuse and neglect of bare metal.
Our Trijicon RMR cut is milled to a depth of .125" which includes front recoil posts and mounting screws.
If you order the SRO cut you cannot have the forward dovetail. The optic will overhang into the forward dovetail and you will not be able to use the rear iron sight. Either behind optic or race cut is the only option for the SRO.
Screws supplied are (2) #6-32 7/16". Both are safe to use on the extractor side of the slide. A T10 bit is needed for install.
We do not charge extra for disassembly/reassembly, if you send your entire slide assembly we will laser align the sights for you.
If you include new sights we will install the new ones at no charge. If you include your RMR, barrel and recoil spring we will align it for free.
Does not work on the 42. 43. 43x. 48. (small slides)
Carbon Cap - This is used to fill the milled area of the slide when the optic is not in use. You are able to use standard or suppressor height sights with this installed.
Sealing Plate - With the seal plate installed, the RMR can be submerged up to 66ft. for at least one hour without leakage. Made from stainless steel and weighs 2.8 g.