Yeti

MSRP:
Was:
Now: $200.00
(You save )
(51 reviews) Write a Review

Description

If holster wear/durability is a concern then we highly recommend going with our Black Nitride as Cerakote is a wearable item. 

Cerakote and Black Nitride are for the entire slide. (Black Nitride adds 2-3 weeks lead time) 

For Cerakote color codes and examples: https://jagerwerks.com/cerakote/

If (NONE) is selected for cerakote the slide will be returned raw, machined metal. All internals will be removed and included with the slide. Please make sure that you have arrangements for slide coating if we do not coat it.  

It is implied that the customer will have arrangements for coating of a slide if NONE is selected for color. If NONE is chosen there is potentially an issue for rust and corrosion to develop on the slide. Jagerwerks is not responsible for misuse and neglect of bare metal.

 

Trijicon SRO - Due to the design of the SRO the "front of optic" is not a usable option. Only the Race Cut and "behind optic" are available.

Deltapoint Pro - on a Glock slide we must use the iron sight that attaches to the optic housing from Leupold. We do not offer standard iron sight dovetails behind, or in front of the optic. 

Does not include chamfer cut*

 

51 Reviews

  • 5
    Jager 19

    Published by Cel on Nov 15th 2024

    Got my G19 gen 3 back. Selected the Yeti option, nitride finish, race cut optic, and bullnose milling. I couldn’t be more happier with the results. Someone commented “is that the gen 6 version?, my answer was “it’s the Jager 19 version”. This is not the first time I dealt with JW and it won’t be the last. I’m a stickler for detail and JW comes through again. If you’re looking for the best in the business, these guys are your go-to.

  • 5
    Yeti Slide milling

    Published by Manuel Cruz on Oct 17th 2024

    This is the second Glock slide I have had milled by Jagerwerks and I am as impressed this time as I was the first time. Just incredibly first class work. I get many comments on the milling and the finish, and many guys ask who/where I had the work done. I happily recommend Jagerwerks to everyone. Oh, and this time I was pleasantly surprised that it was completed quite a bit earlier than forecasted.

  • 5
    Slide milling

    Published by Joe on Sep 6th 2024

    I have used Jagerwerks four times and each time was perfection. This was the first time I had some custom milling done besides the red dot sight pocket. It too was perfect. I also choose the nitride finish and yep, you guessed it, perfection. I’d recommend Jagerwerks for any and all of your milling needs.

  • 5
    Yeti

    Published by Jim3091 on Jul 10th 2024

    First time getting work done by JagerWerks. It took a little while to get my slide back. When I got it I realized why. The work was flawless. JagerWerks is now my go to company for slide milling and optics cuts. Could not be happier. Be patient, it is worth the wait.

  • 5
    Slide milling

    Published by Rob on Jun 28th 2024

    Jagerwerks does great work, I have sent them three slides now and have been very happy. Everything is machined perfectly. They lined up the new serrations with the manufacturers flawlessly. All of my red dots are tightly secured and have all held zero. I will send them more work in the future.

  • 5
    Yeti cut with optic milling

    Published by Phillip Turner on Apr 20th 2024

    The workmanship and attention to detail is phenomenal !!! I am very happy with the results. After mounting my EPS GR optic and ameriglo sights, I zeroed it at the range. It is absolutely AMAZING!!!

  • 5
    Very very happy

    Published by Mario on Mar 29th 2022

    I bought the yeti cut on a blank Glock 34 slide with an SRO cut with the burnt bronze finish and I have to say, Jagerwerks knocked it out of the park. I think the fact that they are so in demand is very telling about how awesome of a service they provide. The cuts looked great as well as the cerakote. I did have trouble fitting my ejector pin because the channel wasn't deburred but it was a mild annoyance that I resolved on my own. I will be using their service again in the future.

  • 5
    Yeti/ black nitride/ sight installs

    Published by Jaime Martinez on Feb 23rd 2022

    Never seen or handled any custom slide, JagerWerks has set the bar pretty high, in my opinion, after receiving my slide back. The Yeti design looks perfect, finish on it is even, the lines are clean, no signs of any imperfection. Communication was actually really good. Usually got a response within 24hours. The wait time is long but well worth the wait! Slide now sits on my G-19.4 stippled frame and is my EDC!

  • 5
    G17 Gen 5 Yeti

    Published by Craig on Oct 22nd 2021

    This will be my second Jagerwerks slide and both are fantastic. Definitely will be my go to for any future slide milling.

  • 5
    Yeti/black nitride/irons forward/chamfer w/ serrations/ top serrations.

    Published by Frankie Fernandez on Sep 24th 2021

    I want everyone to know to who reads this that I know that JagerWerks lead time are long right now. They will get you your slide back and it will be done perfectly. (09/24/21). This slide turned out exactly how I wanted. JagerWerks has done 4 of my slides so far and they have always done an amazing job. Five stars!

Related Products