Description

If holster wear/durability is a concern then we highly recommend going with our Black Nitride as Cerakote is a wearable item.

Cerakote and Black Nitride are for the entire slide. (Black Nitride adds 2-3 weeks lead time)

For Cerakote color codes and examples: https://jagerwerks.com/cerakote/

It is implied that the customer will have arrangements for coating of a slide if NONE is selected for color. If NONE is chosen there is potentially an issue for rust and corrosion to develop on the slide. Jagerwerks is not responsible for misuse and neglect of bare metal.

Our Holosun 407c/507c/508t cut is milled to a depth of .125" which includes front recoil posts and mounting screws.

Screws supplied are (2) #6-32 IP15. Both are safe to use on the extractor side of the slide. An IP15 wrench is included for install.

We do not charge extra for disassembly/reassembly, if you send your entire slide assembly we will laser align the sights for you.

If you include new sights we will install the new ones at no charge. If you include your 407c/507c/508t, barrel and recoil spring we will align it for free.

If your iron sights are not compatible with the optic/optic cut we will not reinstall them. They will be sent back in a plastic bag with your slide.

For iron sights please refer to this page Holosun 407C/507C/508T Iron Sights

The $20 upcharge on the 17L/41 is for a stainless steel plug that we install on the underside of the slide. This ensures proper thread engagement.

UPC:

149 Reviews

5
Holosun cut for Glock 17

Published by terrynmic@charter.net on Jul 12th 2021

Great work - looks and functions excellent. Quick turnaround time too, several weeks less than estimate given at time.
5
Slide cut for Red dot

Published by Tom on Jul 10th 2021

The machining looks great and the red dot fits perfectly . The black nitrite coating looks great ! Awesome job at a great price. I already have another slide on the way to have the same thing done. Thank you.
5
Cut/nitride

Published by Rod L on Jul 10th 2021

The cut/mounting came back perfect of course, but let’s not forget how good their black nitride looks! You can tell the quality of their work the second you get it back. Add on the complimentary sighting aligning and installation of the irons and they got a lifetime customer out of me.
5
Optics cut

Published by Chris B on Jun 29th 2021

I have now had 2 of these done my 19X and G20 with BNC average turnaround has been roughly two months. Didn't finish for the most part has been absolutely excellent the only issue I have had but a little bit of trash in the threads which they walked me through easily... and offered to take it back and clean it for me free of charge postage paid. Overall I am very pleased quality do their work and customer service. I will absolutely use them again for my G48. I also highly recommend using Dawson precision if you're trying to go for a 1/3 Co Witness. Call their customer service measure your current optic height and they will get you the correct pair of sights.
5
507C cut.

Published by Ray P on Jun 11th 2021

Excellent work. Probably one of, if not the best shops doing cuts. I had a terrible experience with another shop and JagerWerks set the bar high. I don’t know if there’s a reason to go elsewhere with the quality you get. Im extremely pleased.
5
Excellent work

Published by Garrett S on Jun 6th 2021

JW got the job done perfectly and faster than the estimated turnaround time. They even pulled the firing pin channel liner without asking, which was super convenient as I told them I'd be painting my own slide. I will be sending more work to these guys next time I need slide milling done!
5
Optic cut

Published by Preston on Jun 2nd 2021

Super clean cut and perfect fit. Cowitness is on point paired with the Dawson precision sights! Thanks again to Steven and the crew at Jagerwerks for making my slide that much better!
5
Optic cut

Published by Unknown on May 28th 2021

Precision machining! Optic fits snug with no movement. Highly recommended!
5
Perfect cut, perfect fitment

Published by JOE Z on May 24th 2021

I just received my slide for my g19x and slapped on my holosun sight. The red dot fits perfectly. No movement at all. The mounting screws were easy in so the threads weren't stripped or rough. Quality machining. The wait was rough it was about 1.5 months from the day I shipped it to the day I got it but it was worth it. No damage on the rest of the slide, I went without a coating because I wanted to keep the g19x color. I do wish I would've also purchased 1/3 sights but it's an easy add on. Jaegerworks also emails you when they receive your parts which was a nice piece of mind after shipping half your gun in the mail. Pricing is fantastic considering a local shop does cuts for 200 and not cnc machined. I will for sure be using this service for future firearms, No doubt about it. I looked at all the competitors, just go Jagerworks and trust in the process, better to do it right the first time.
5
Craftsmanship

Published by Darin Sasamoto on May 3rd 2021

I cannot explain how pleased I am with the work they’ve done to my G19 slide. I even changed the cerakote color on them and they gave me zero problems. The craftsmanship is 2nd to none. You have a customer for life. Thank you so much. You guys are true professionals and it shows in your work.