Related Products
MOS+ Optic Plate for Glock
The JagerWerks MOS+ Optic Plate for Glock MOS if made from 4140 Chromoly Steel that is pre-hardened, milled in house, and then Black Nitrided. JW Logo is laser engraved after nitride. We have...
A1 - Optic mount
JagerWerks A-1 mount 2.25" from picatinny rail to optic centerline Aerospace grade 7075 Aluminum, type III hard coat anodized Stainless steel thread inserts for long service life
MOS+ 3rd Screw Upgrade for Factory MOS
This upgrade is for a Factory MOS to be drilled and tapped for the third hole for our MOS+ plates. Coating isn't necessary when using threadlocker. It isn't a through hole, but it's always...
Description
SOLD AS A PAIR. 2 screws total.
(#1) Trijicon RMR/SRO - #6-32 x 7/16" IP15 (equal length)
(#1) Holosun K Series - #6-32 x 7/16" IP15 (equal length)
(#2) Holosun 407c/507c/508t/COMP - #6-32 x 5/16" IP15 (equal length)
(#3) Vortex Viper/Swampfox Sentinel - #6-32 x 3/8" IP10 (equal length)
(#4) EPS/EPS Carry - #6-32 x .360" IP15 (equal length)
(#5) Shield RMS/c - #6-32 x 3/8" IP15 (equal length)
(#6) Vortex Venom - #6-32 x 7/16" 7/64 Hex (equal length)
(#7) Glock MOS+ RMR/SRO - #6-32 x .370" IP15 (equal length)
(#8) Burris Fast Fire 3 - #6-32 x 3/8" IP15 (equal length)
(#9) Carbon Cap - #6-32 x 5/16" IP15 (equal length)
(#10) K Series 43/48 MOS Upgrade (Reference only) - Holosun OEM Screws trimmed to .400 OAL (These are the screws that come with your optic, not provided by JagerWerks)
All IP15 screws will come with the correct wrench for install
*We cannot confirm or deny if these screws work with other optic cuts. JagerWerks is not responsible if you strip out your optic cut, mount, etc. Professional install only by a certified gunsmith*
Some screws may have to be modified for fitment. Please contact JagerWerks or a certified gunsmith before attempting install of screws.
Does not work with MOS Glocks.
Does not work with Sig P365XL
We recommend a small amount of Blue 242 Loctite on each screw to prevent backing out.
Note* Please be careful when installing screws with the new Holosun EPS, tolerances can be slightly different and the screw caps come close to the glass. If JagerWerks does not do the installation we cannot guarantee fitment. Some optics and optic cuts require the screws that come with the optic from the original company.
35 Reviews
-
Good customer service but didn't fit Brownells slide
I bought this to attach a RMR cut optic to a Brownells RMR cut slide, but the screws were too big to fit into that slide. The shipping was fast and I'm sure the product would work well if I had a different slide. However if you are buying for a Brownells slide, this product will not work. It's a real shame, because my slide did not come with screws and Brownells does not sell them separately.
-
Best fitment
The screws fit perfect and sit deep into the RMR pre-drilled holes. I have tried other screws and some are too long (especially the oem) or too short, but these are spot on. These are a must buy if you own an RMR.
-
Arrived quickly - did not receive a torx wrench
I believe the addition of the Torx Wrench is new, but I just ordered a replacement set of screws and it shipped out super quick in a padded bubble mailer. Screws seem well made and fit perfectly. I did not receive a torx wrench though, but I have a ton of T10 bits so it was no problem.
-
Solid Quality Screws
These screws are a must. You're spending a bunch of money on milling and an RMR, why connect them with shabby screws that strip out the first time you have to change a battery? Get these and have the peace of mind that your RMR will stay put.
Shipping & Returns
Shipping
Please ship to our address
JagerWerks Eng LLC
111 D ave East
Kalamazoo MI, 49009
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Shipping Insurance and Signature Confirmation
http://jagerwerks.com/shipping-insurance-with-signature-confirmation/
When shipping slides for milling, SHIP SLIDES ONLY. Do NOT ship the lower of the firearm as we are not transferring the firearm. We only custom mill slides.
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, please Contact Us with your order number and details about the product you would like to return. We will respond quickly with instructions for how to return items from your order.