Slide Milling is for customer supplied slides.

The current lead time is 4-8 weeks with an additional 1-3 for coating.

Shipping advisory: Due to issues with USPS JagerWerks is not responsible for packages after they leave our shop and we insist

you get shipping insurance for your returns under the GEAR section of our site. 

Free return shipping on orders over $100.

Optic Screws

MSRP:
Was:
Now: $7.00
(You save )
(36 reviews) Write a Review
Optic Screws

Description

SOLD AS A PAIR. 2 screws total. 

(#1) Trijicon RMR/SRO - #6-32 x 7/16" IP15 (equal length) 

(#1) Holosun K Series - #6-32 x 7/16" IP15 (equal length) 

(#2) Holosun 407c/507c/508t/COMP - #6-32 x 5/16" IP15 (equal length) 

(#3) Vortex Viper/Swampfox Sentinel - #6-32 x 3/8" IP10 (equal length) 

(#4) EPS/EPS Carry -  #6-32 x .360" IP15 (equal length)

(#5) Shield RMS/c - #6-32 x 3/8" IP15 (equal length)

(#6) Vortex Venom - #6-32 x 7/16" 7/64 Hex (equal length) 

(#7) Glock MOS+ RMR/SRO - #6-32 x .370" IP15 (equal length)

(#8) Burris Fast Fire 3 - #6-32 x 3/8" IP15 (equal length) 

(#9) Carbon Cap - #6-32 x 5/16" IP15 (equal length) 

(#10) K Series 43/48 MOS Upgrade (Reference only) - Holosun OEM Screws trimmed to .400 OAL (These are the screws that come with your optic, not provided by JagerWerks)

All IP15 screws will come with the correct wrench for install

*We cannot confirm or deny if these screws work with other optic cuts. JagerWerks is not responsible if you strip out your optic cut, mount, etc. Professional install only by a certified gunsmith*

Some screws may have to be modified for fitment. Please contact JagerWerks or a certified gunsmith before attempting install of screws. 

Does not work with MOS Glocks.

Does not work with Sig P365XL

We recommend a small amount of Blue 242 Loctite on each screw to prevent backing out. 

Screws pictured are for Trijicon RMR* 
 
Our Trijicon RMR/SRO - Holosun 407C/507C/508T/K series - Burris FF3 screws have a tensile strength of 83 KSI (83,000 PSI). 
 

Note* Please be careful when installing screws with the new Holosun EPS, tolerances can be slightly different and the screw caps come close to the glass.  If JagerWerks does not do the installation we cannot guarantee fitment.  Some optics and optic cuts require the screws that come with the optic from the original company.

 

36 Reviews

  • 5
    RMR Screws

    Published by Rob on Oct 15th 2019

    I had my slide cut by another place and the screws they gave were way too long they were impeding my ejection rod. I ordered these in a hurry and the fit was superb. You could feel the positive link as I was torquing my optic to my slide and when I checked the ejection rod port no extra screw length to bind up anything. Best investment I've made and I'm going to keep using these for every optic I mount to a pistol.

  • 5
    Best Screws Ever

    Published by JP on Aug 16th 2019

    I never thought i would submit a review for a pair of screws but these are totally worth the $7. They are far and away a better fit/finish that the stock and feels way more solid. Treat yourself to the luxury of the jagerwerks RMR screws.

  • 5
    Rmr screws

    Published by Jeff on Aug 12th 2019

    By the third rmr battery change I had just about rounded out the Allen key screw. I did a bit of searching and based on a couple friends advice I ordered from Jagerwerks. The tool engagement is much better with the torx than an Allen wrench. These were the perfect fit and I’m very pleased with the fit and finish

  • 5
    Perfect

    Published by Raudel on Jul 22nd 2019

    I bought a aftermarket slide and the seller/builder only guaranteed that mos screws would work fine. But the MOS screws only offered like a couple millimeters of depth. These screws were the absolute perfect length in combination with a sealing plate. Also a much more refined look than MOS screws and definitely better functionally being torx. I nearly stripped the hex hole of the other screws

  • 5
    MOS Screws

    Published by Joe_K on Jul 22nd 2019

    I sent a politely worded email to the good folks at JW and asked if they could cut these Torx screws down to 0.390 inches long in order to work with the Glock MOS 02 RMR/SRO plate, they obliged and sent me two sets and so far they’re working great, much higher quality than anything else on the market right now.

  • 4
    Good customer service but didn't fit Brownells slide

    Published by Nicholas on Jul 10th 2019

    I bought this to attach a RMR cut optic to a Brownells RMR cut slide, but the screws were too big to fit into that slide. The shipping was fast and I'm sure the product would work well if I had a different slide. However if you are buying for a Brownells slide, this product will not work. It's a real shame, because my slide did not come with screws and Brownells does not sell them separately.

  • 5
    Best fitment

    Published by Unknown on Jun 20th 2019

    The screws fit perfect and sit deep into the RMR pre-drilled holes. I have tried other screws and some are too long (especially the oem) or too short, but these are spot on. These are a must buy if you own an RMR.

  • 5
    Arrived quickly - did not receive a torx wrench

    Published by Jonathan on Jun 13th 2019

    I believe the addition of the Torx Wrench is new, but I just ordered a replacement set of screws and it shipped out super quick in a padded bubble mailer. Screws seem well made and fit perfectly. I did not receive a torx wrench though, but I have a ton of T10 bits so it was no problem.

  • 5
    Solid Quality Screws

    Published by Ben on Jun 7th 2019

    These screws are a must. You're spending a bunch of money on milling and an RMR, why connect them with shabby screws that strip out the first time you have to change a battery? Get these and have the peace of mind that your RMR will stay put.

  • 5
    Red dot screws

    Published by M Kramer on Apr 9th 2019

    Having replacement screws is very important to me traveling from competition to competition. That’s why I ordered the best from the best.

Related Products