Description

If holster wear/durability is a concern then we highly recommend going with our Black Nitride as Cerakote is a wearable item.

Cerakote and Black Nitride are for the entire slide. (Black Nitride adds 2-3 weeks lead time)

For Cerakote color codes and examples: https://jagerwerks.com/cerakote/

It is implied that the customer will have arrangements for coating of a slide if NONE is selected for color. If NONE is chosen there is potentially an issue for rust and corrosion to develop on the slide. Jagerwerks is not responsible for misuse and neglect of bare metal.

Our Holosun cut is milled to a depth of .145" which includes front recoil posts and mounting screws.

Screws supplied are (2) #6-32 IP15. Both are safe to use on the extractor side of the slide. A IP15 is needed for install

We do not charge extra for disassembly/reassembly, if you send your entire slide assembly we will laser align the sights for you.

If you include new sights we will install the new ones at no charge. If you include your Holosun, barrel and recoil spring we will align it for free.

If your iron sights are not compatible with the optic/optic cut we will not reinstall them. They will be sent back in a plastic bag with your slide.

Iron Sights:

A Glock dovetail will be milled either behind the optic or in front of the optic.

Rear Dovetail (iron sight behind optic)

For lower 1/3rd Co-Witness you would need a Glock .325" rear.

https://dawsonprecision.com/dawson-precision-glock-mos-fixed-co-witness-rear-sights/

For the front sight you would need a M&P .265" front.

https://dawsonprecision.com/dawson-precision-s-w-m-p-and-m-p-core-black-front-sights/

Front Dovetail (iron sight in front of optic)

For lower 1/3rd Co-Witness you would need a Glock .260" rear.

https://dawsonprecision.com/dawson-precision-glock-mos-fixed-non-co-witness-sights/

For the front sight you would need a M&P .265" front.

https://dawsonprecision.com/dawson-precision-s-w-m-p-and-m-p-core-black-front-sights/

If you include these iron sights we will install them for free.

Loaded Chamber Indicator requires a stainless plug to be welded into the slide.

UPC:

14 Reviews

5
M&P 2.0 Holosun 407C/507C/508T

Published by Jacob on Aug 14th 2024

Just my slide back from Jagerwerks. I just have to say that Jagerwerks far exceeded my expectations. The slide looks brand new. When I sent it my slide it had some holster wear and was looking a little dirty. The fit of the optic was exact and there are no gaps or imperfections! Excellent! Sending my other pistol in to get done!
5
M&P 2.0 cut for a 507c

Published by Sean on Feb 18th 2024

Another outstanding job by Jagerwerks. Had previous cuts done for my Glock. This was the first for my M&P and the work is superb. Very pleased.
5
M and P 2.0 Slide Work

Published by Bryan Gustafson on Feb 16th 2024

Highly recommend! I sent my slide in for an optic cut, top window, and serrations. I could not be more thrilled with the final result! The team at Jagerwerks did an awesome job and it was totally worth the wait. The nitride coating that was added is as perfect as a factory finish. I will be using them for any future work on my handguns.
5
507c Cut

Published by Jacob on Dec 26th 2023

Fantastic work and the cerakote is immaculate. Well worth the wait.
5
Great Customer Service

Published by Mike on Feb 23rd 2023

Jagerwerks was able to cut my M&P 1.0 with hollow roll pins. Very precise cuts excellent Nitride finish and perfect recut rear sight groove. Also gave me the specs to order the proper suppressor height sights from Dawson Precision. Thanks again for the great work.
5
S&W M&P 2.0 45 Holosun Optic cut

Published by Corbett on Feb 11th 2023

Time frame was right at the estimated listed time frame. Sent in the complete slide, optic and sights and came back looking excellent. Have not had a chance to test it out but looks like it will be no issue. Only issue I have found so far is the suggested rear sight list by Dawson looks a little to short, or maybe I didn’t order the correct one. Either way it appears to be mounted perfectly. Awesome job and would definitely recommend this and use Jagerwerks again.
5
M&P 45 2.0

Published by Wayne on Dec 24th 2022

I am Well satisfied with the Race cut for Holosun 507C on my M&P 45 2.0. It is very cleanly finished and the optic fit perfectly. I opted for Black Nitride and the refinish was great as well. The wait time is on the long side, but it’s worth it. I will definitely us Jagerwerks again.
5
Great stuff

Published by Matthew McNair on Sep 17th 2022

Cut job is beautiful and so is the cerakote! It takes some time to get it done but it is well worth the wait. My carry/competition gun is far better off having had this service done. Thanks Jagerwerks!
5
Holosun/Swapfox Optic cut is perfect

Published by Brian Beard on Apr 5th 2022

I received my slide back recently and was able to mount a Swampfox liberty which fit perfectly into the new cut. The M&P is a difficult cut because of the rear sight hiding a pocket for the striker safety, also since I chose the rear dovetail be in front of the optic that mean that the new rear sight dovetail is over the extractor pin. JagerWerks carefully removed my stock sights and trimmed the pin required as well as included all removed parts (safety plunger, cap, and spring along with the front and rear sights) in a bag. The shortened extractor pin was installed though, which is one less thing to wory about. The front optic posts fit perfectly and there was no wobble at all when dropping on the optic. I'm very impressed with the finish as well. They mentioned that nitride finish would take extra time, but it wasn't too bad and definitely worth the wait. It looks stock. I was able to install the Dawson precision sights as recommended in the item description and I'm very pleased with the results. I love my M&P even more with an optic and I'll likely be sending in my CZ P10c as well very soon. Great werk JagerWerks!
5
Fantastic work

Published by Ross on Feb 17th 2022

First slide milling experience with JW and they knocked it out of the park. Got in on the Black Friday sale and the pricing was too good to pass up. That being said, seeing the work in hand, I'd have no problem paying full price. Everything was precisely done and fit the optic perfectly. Also sent some sights in that were installed and aligned for free. The included mounting screws fit perfectly and mounting everything up was a breeze. Really have nothing else to say that hasn't already been said dozens of times. This will likely be the only company I will ever send slides to again. Well done.