Description

If holster wear/durability is a concern then we highly recommend going with our Black Nitride as Cerakote is a wearable item.

Cerakote and Black Nitride are for the entire slide. (Black Nitride adds 2-3 weeks lead time)

For Cerakote color codes and examples: https://jagerwerks.com/cerakote/

It is implied that the customer will have arrangements for coating of a slide if NONE is selected for color. If NONE is chosen there is potentially an issue for rust and corrosion to develop on the slide. Jagerwerks is not responsible for misuse and neglect of bare metal.

CZ front sights are very difficult to remove without damaging it. We do our best to remove it without damage, but you should plan on replacing it.

Rear dovetails are cut for Glock rear sights.

The Top Front Cut photo slides are shown with the Serrated Chamfer with JW logo option*

** When milling for an optic on a CZ P10 the right (extractor side) screw hole will break into the striker assembly. This will not cause any issues with reliability of the firearm.**

UPC:

88 Reviews

5
P10c slide work

Published by David S on Jun 11th 2021

Always considered Jagerwerks for a long time and finally did it. Absolutely worth it, very easy process. Literally put the slide in a box and wait a month or so. I had it cut for the RMR/irons and it fit perfectly. Serrations and black nitride finish came out perfect. I can’t find any imperfections. As expected great service and great result.
5
Great Job

Published by Jasper on Jun 11th 2021

Highly recommended.. 2 thumbs up!!!
5
I’m in love

Published by Yordanis Manzanillo on Apr 17th 2021

Best costumer service ⭐️⭐️⭐️⭐️⭐️ Got it on Black Friday (the real deal) I changed my mind about the color/optic cut I chose, 2 months later I contacted them to change color/optic cut and they just did it with no up chargers whatsoever,sent the slide and got it back looking so good.
5
Amazing work!

Published by Mick Brentar on Apr 14th 2021

I received my slide back and I'm impressed. I had the slide milled for a Holosun 507, with the top and chamfer cuts. I also had the Jagerwerks team install some co-witness sights. The fit and finish are perfect. The Optic mounted directly and effortlessly to the slide with the supplied screws. Steve was prompt when E-mailed with questions. I absolutely recommend the work of this fine shop.
5
P10c slide milling

Published by Derek Norvell on Apr 7th 2021

Awesome work! Will be back when I am in the market for more millwork .
5
Cz p10c

Published by Julio Valdezsilva on Mar 11th 2021

Looks so good and the serrations are the perfect amount of grip and EDC. Not so sharp you'll rub your hand raw after hours of weapons manipulations. Now that I have cut for the SRO I can finally carry it and switch between this and my glock w/rmr
5
Slide Work

Published by Paul on Mar 11th 2021

I got the slide work done to my P10C and it came out absolutely incredible! I got it cut for an RMR with the front serrations and JW logo and it’s better than expected. Super clean cuts, black nitride finish is flawless and the RMR just snaps into place. Excellent work!
5
CZ P10C Slide Milling & Cerakote

Published by Adam on Feb 24th 2021

I could not be more impressed with Jagerwerks! The slide milling and cerakote that they did is flawless. Anyone considering these services should have full confidence that every expectation will be not just met, but exceeded.
5
CZ P10F

Published by Unknown on Feb 18th 2021

Tremendous quality, insanely awesome customer service, tremendous work!!!! Can’t wait to buy another to send in!!! Thank you
5
RMR cut/Top window/Chamfer & Cerakote

Published by Rene Iniguez on Feb 3rd 2021

As expected through a lot of research for P10c front angle serrations(chamfer), I found Jagerwerks and I wasn't surprised with the work I received. Excellent machining, cerakote job is great along with they're service. Received mine in 7 wks as told and couldn't be happier.