SIG P320
Zoom the image with the mouse

SIG P320

(21 reviews) Write a Review
$0.00
Size Chart

Related Products

Description

Cerakote is for the entire slide. 

It is implied that the customer will have arrangements for coating of a slide if NONE is selected for color. If NONE is chosen there is potentially an issue for rust and corrosion to develop on the slide. Jagerwerks is not responsible for misuse and neglect of bare metal.

Trijicon RMR cut with front posts. You are able to use Trijicon supplied RMR screws. Cut at .125" 

Sig Romeo 1 Pro does not have recoil posts*

We do not charge extra for disassembly/reassembly, if you send your entire slide assembly we will laser align the sights for you.

If you include new sights we will install the new ones at no charge. If you include your RMR we will align it at no charge.

Using Ameriglo SG-181 you will have a lower 1/3 co-witness.

A Sig rear dovetail will be milled for the rear iron sight. 

Some of the older model 320's have a deep channel cut underneath/rear section of the slide. We cannot mill these for optics ( see photo ) 

 

21 Reviews

  • Sig p320 slide
    5

    Posted by Vaughn Orndorff on Nov 7th 2019

    They did a great job on the milling and finish is flawless. I received it back after the 4 weeks which they had estimated.

  • Very pleased
    5

    Posted by JH on Sep 30th 2019

    Great communication with Jagerwerks about a question before work even started. Fast turn around. The slide and dot were well padded in the box. Finish was perfect. The new irons and the dot were boresighted and the irons were dead on and the dot only needed a minor tweak for elevation and it was zeroed. If I’m going to have another slide done for a dot, it’ll be sent here. Fantastic job guys, you got another very satisfied customer here.

  • Sig 320 Compact Slide
    5

    Posted by Texas Ranger on Sep 30th 2019

    Sent this in for milling, cerakoting, and mounting new iron sights and the Trijicon RMR. From the day I dropped it in the mail until I got it back was 10 days exactly, and it was perfect! Great work and fast, too

  • Exceeded my Expectations
    5

    Posted by David H on Aug 20th 2019

    There’s a reason Jagerwerks is one of the most recommended shops for slide milling. I sent in my P320 compact slide for a SRO cut, too window cutout, and nitride refinishing. I opted not to send in my SRO because USPS has given me so many headaches over the years I didn’t want to risk losing it, as their insurance claim policy is a joke.

    Back on topic, the turnaround time was much faster than anticipated and the finish looks amazing. The SRO fits nice and tight. Most shops require the optic in hand to guarantee a perfect fit but these guys have it nailed down. The locating lugs are a nice touch as some other shops don’t include them.

    Also a plus is the part of the slide that Sig milled for the voluntary recall is now protected instead of bare metal how they return it to you.

    My only slight gripe is I would like the pocket to have been milled a tad bit deeper, but that may not be possible so I will give them the benefit of the doubt. As is the Ameriglo SG-181 suppressor height sights don’t quite co-witness though the SRO, but that’s because the SRO’s window sits a little higher than the RMR. They are still usable and since I went with Trijicon I don’t foresee any issues as my pistol is not being used for duty, and I don’t plan on dropping it on concrete optic first. I can always go to an RMR in the future if needed.

Write a Review

Shipping & Returns

Shipping

Please ship to our address 

JagerWerks Eng 

2909 Lake St 

Kalamazoo, Mi 49048 

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

 Shipping Insurance and Signature Confirmation 

http://jagerwerks.com/shipping-insurance-with-signature-confirmation/

When shipping slides for milling, SHIP SLIDES ONLY. Do NOT ship the lower of the firearm as we are not transferring the firearm. We only custom mill slides.

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, please Contact Us with your order number and details about the product you would like to return. We will respond quickly with instructions for how to return items from your order.