If holster wear/durability is a concern then we highly recommend going with our Black Nitride as Cerakote is a wearable item.
Cerakote is for the entire slide. (Black Nitride adds 2-3 weeks lead time)
For Cerakote color codes and examples: https://jagerwerks.com/cerakote/
It is implied that the customer will have arrangements for coating of a slide if NONE is selected for color. If NONE is chosen there is potentially an issue for rust and corrosion to develop on the slide. Jagerwerks is not responsible for misuse and neglect of bare metal.
Our Vortex Venom includes front recoil posts and mounting screws. When the iron sight dovetail remains in the factory location there is a small hole created on the front of the optic cut. Due to the length of the optic we will mill into the safety plunger channel. This will not affect the performance or safety of your slide.
Screws supplied are (2) #6-32 1/4".
We do not charge extra for disassembly/reassembly, if you send your entire slide assembly we will laser align the sights for you.
If you include new sights we will install the new ones at no charge. If you include your Venom, barrel and recoil spring we will align it for free.
If your iron sights are not compatible with the optic/optic cut we will not reinstall them. They will be sent back in a plastic bag with your slide.
If you select to have the dovetail behind the optic (standard configuration) you will need approximately .420" tall sights for a co-witness. Due to the length of the Venom and having to be very close to the rear dovetail some rear sights will need modification.
Here is the link to the .420” set.
Glock MOS Fixed Co-Witness Sight Set - Black Rear & Fiber Optic Front
Ameriglo 2XL irons will fit without any modifications.
GL-330, GL-470, GL-481, GL-681, GL-810, GL-814. These are for a rear dovetail only*
If you select to have the dovetail in front of the optic, you will need approximately .395" tall sights for a co-witness. No modification needed.
The $20 upcharge on the 17L/41 is for a stainless steel plug that we install on the underside of the slide. This ensures proper thread engagement.